Bakery Equipment

Product Details:

Made from large thickness C40 steel.

- Scratch resistant powder coating.

- Bowl with reinforced edge and AISI 304 S/S shaft.

- Forged spiral tool.

- Lid with opening to add ingredients during operation.

- High efficiency ventilated motor with oil-bath gear box.

- Thermal overload protection circuit breaker.

- Reinforced chain drive.

- Low voltage IP67 protection rated controls.

- This mixers are suitable for all kinds of pizza doughs.

TA VERSION

- Liftable head for tank removal and easy clearing.

- Removable container.

Optionals:

- Wheels and timer

Product Details:

Motor

3 h.p. (2,250W), grease packed ball bearing, air-cooled, 230V/50Hz/1Ph, 220V/380V/3Ph

Controls

Front-Mounted Control Panel gives easy access in cramped kitchen environments.

Equipped with Emergency Stop Button, Start Button and Mechanical Timer are as standard. Digital Timer Panel is optional.

Cord and Plug

6 ft. flexible three wire cord and ground prong.

Transmission

Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.

Speeds(Agitator rpm)

Low Speed 73

Intermediate Speed 120

High Speed 267

Bowls and Agitators

Standard equipment includes a 60Qt. (60L) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy Wheel on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.

Attachments

Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.

Finish

Top (transmission cover): metallic bronze epoxy enamel

Bottom : metallic gray epoxy enamel

Shipping Information

N.W. 285kgs

G.W. 310kgs

Size: (L x W x H)

638mm x 778mm x 1,316mm

Product Details:

Motor

1/3 H.P (250W) AC Motor, grease packed ball bearing, air-cooled, 110V/60Hz, 220V/50Hz, Single phase

Controls

Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, and thermal overload protection

Cord and Plug

Single phase are hard wired

Transmission

Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.

Speeds(Agitator rpm)

1st gear 132 rpm

2nd gear 234 rpm

3rd gear 421 rpm

Bowls and Agitators

Standard equipment includes a 8 Qt. (7.6Litres) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.

Finish

Powder Coating

Shipping Information

N.W. 25.25 kgs

G.W. 27.55 kgs

Size: (L x W x H)

346mm x 420mm x 579mm

 

Product Details:

Motor

1 h.p. (750W), grease packed ball bearing, air-cooled, 230V/50Hz/1Ph, 220V/380V/50Hz/3Ph. Powerful 1.5HP Heavy Duty Motor for Pizza Dough is available.

Controls

Front-Mounted Control Panel gives easy access in cramped kitchen environments. Equipped with Emergency Stop Button, Start Button and Mechanical Timer are as standard. Digital Timer Panel is optional.

Cord and Plug

6 ft. flexible three wire cord and ground prong.

Transmission

Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.

Speeds(Agitator rpm)

Low Speed 93

Intermediate Speed 165

High Speed 319

Bowls and Agitators

Standard equipment includes a 30Qt. (30L) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.

Attachments

Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.

Finish

Top (transmission cover): metallic bronze epoxy enamel

Bottom : metallic gray epoxy enamel

Shipping Information

N.W. 195kgs

G.W. 213kgs

Size: (L x W x H)

576mm x 668mm x 1,172mm

Product Details:

Gas salamander with movable top - 600 mm

 

Power : 5 kW

Outside dimensions : 600 x 640 x 590 mm

Baking surface : 495 x 375 mm

Weight : 53 kg

 

SGM 600: THE professional gas salamander grill with high power!

The professional gas salamander grill SGM 600 is equipped with 2 infrared double burners with safety thermocouples. Each burner has a width of 60 mm. Depending on the type of gas used, the temperature can be reached between 700 ° C and 800 ° C. After 10 minutes of preheating time, this professional salamander grill can cook or grill food very quickly.

Vary your cooking with the gas salamander SGM 600!

The gas salamander SGM 600 can defrost, heat, brown, glaze dishes, grill toasts, gratins, onion soups etc.

The flame control knob - small flame with idle position - adjusts the heating power to the desired cooking mode.

This gas salamander grill is completely open on 3 sides to accept dishes of any size.

Nothing easier to use and to clean than the gas salamander SGM 600 with movable top !

The movable top of the salamander grill SGM 600 has a precise height adjustment system to bring the right heat to the dish without any effort! The professional gas salamander SGM 600 is equipped with a brick-mounted counterweight and a patented ball-bearing system to facilitate the up and down of the roof to the nearest millimeter.

The professional salamander grill SGM 600 is easy to clean: the grid and the lower tray are completely removable. The burners can be wiped with a soft cloth once the gas salamander is turned off and cooled down.

Features: 2 infrared double burners, adjustment knob, grid and bottom tray.

Option: wall mounted holder (SM 1)